Opening hours: Mon-Fri from 9.00 to 17.00
 

Constant pressure kit with Grundfos SQE deep-well pump

Short information
Rated flow: 2.0 - 5.0 m³/h Rated head: 54.0 - 113.0 m.aq. Art. Pump output: 1 ¼" - 1 ½" Rated power: 700 - 1850 W Maximum fluid temperature: + 35°C
SKU: 96524505sbor
Наименование Краткая информация Артикул Price Qty Add to Cart
Set for maintaining constant pressure with deep-well pump Grundfos SQE2-55 Nominal flow: 2.0 m³/h Nominal head: 54.0 m.aq. Art. Pump outlet: 1 ¼" Rated power: 700 W 96524505

Regular Price: ₴75,012.00

Now only: ₴67,510.80

Set for maintenance of constant pressure with deep-well pump Grundfos SQE3-65 Nominal flow: 3.0 m³/h Nominal head: 70.0 m.aq. Art. Pump output: 1 ¼" Rated power: 1150 W 96524501
₴98,700.00
Set for maintenance of constant pressure with deep-well pump Grundfos SQE5-70 Nominal flow: 5.0 m³/h Nominal head: 73.0 m.aq. Art. Pump outlet: 1 ½" Rated power: 1850 W 96524503

Regular Price: ₴89,543.11

Now only: ₴80,589.04

Set for maintaining constant pressure with deep-well pump Grundfos SQE3-105 Nominal flow: 3.0 m³/h Nominal head: 113.0 m.aq. Art. Pump outlet: 1 ¼" Rated power: 1850 W 96524508
₴123,610.00
Details
Details

Constant pressure kit with Grundfos SQE deep-well pump

The SQE kit is designed to maintain a given pressure in systems for various purposes.

The SQE 2-55 kit consists of:

  • pump SQE with cable;
  • control unit CU 301;
  • hydraulic tank 8 l / 7 bar;
  • pressure sensor for 0 - 6 bar;
  • pressure gauge for 0 - 10 bar;
  • stopcock 3/4" with drain;
  • 20 cable ties.

Advantages:

  • ease of installation of the pump;
  • start/stop of the pump and its operating parameters (pressure from 2 to 5 bar) are carried out using the control buttons located on the CU301 control unit;
  • maintaining a constant pressure in the system;
  • no operating costs.

Submersible   The Grundfos SQE pump is designed for domestic water supply, pumping water from tanks, irrigation systems and small waterworks. The Grundfos SQ pump is equipped with "floating" wheels, each with its own tungsten carbide/ceramic bearing. Due to its compact size, the SQE borehole pump can be installed in boreholes with a diameter of 76mm (3").

A significant advantage of the pumps of this series is the presence of a built-in soft start function and built-in protection: against voltage fluctuations (the pump turns off when the voltage drops below 165 V and exceeds 260 V), overload, overheating and dry running.

With small dimensions, the SQE pump has a high efficiency. If the sand content of the liquid does not exceed 80 gr./m3, a single-phase permanent magnet motor will provide optimal efficiency over a wide power range. The SQE borehole pump can operate in both vertical and horizontal positions.

Reviews