Pressure and temperature regulators

Pressure regulators:

The Teploterm company offers water pressure regulators, pressure reducing valves for steam, air pressure regulators.

The site presents regulators of various technical parameters, which will allow you to easily make your choice of the required regulator.

DESCRIPTION OF PRESSURE REGULATORS, OPERATING PRINCIPLE OF REDUCER VALVES

Downstream pressure regulator - downstream pressure reducing valve.

Pressure reducing valve after itself , sometimes in catalogs and technical literature there is a name - steam pressure regulator after itself . The task of the pressure reducing valve after itself is to maintain a given pressure in the pipeline behind the valve, that is, after the pressure regulator. When the inlet pressure increases, the pressure reducing valve closes, narrowing or, in other words, reducing (hence the name reducing) the flow area in the pressure regulator, thereby avoiding a rise in pressure behind the pressure reducing valve. In the event of a decrease in pressure, the pressure reducing valve, on the contrary, opens, maintaining the set pressure value. The Teploterm company offers pressure reducing valves ARI-PREDU of the German manufacturer ARI-Armaturen. ARI-Predu steam pressure regulators have proven their worth for reducing the pressure of various media. Very often, ARI-Predu pressure reducing valves are used to reduce the pressure of steam and air.

Ari-Predu direct acting pressure reducing valves are specially designed by ARI-Armaturen GmbH (Germany) for use on pipelines of steam, compressed air, nitrogen and other liquids and gases compatible with construction materials and can be used in pressure reducing units in all industries industry. The valve is balanced by a stainless steel bellows, which allows the regulator to be used with significant pressure drops. Normally open, closes when the pressure behind the regulator increases. In addition to the Ari-Predu steam pressure regulator, our company's specialists can select all the components of the steam reduction unit, namely: steam separator SP, Ari-Faba shut-off valve, Ari-Faba bypass control valve, ARI-Safe safety valve, condensate drain unit based on a steam trap Ari-Cona, etc.

Our company also offers pilot steam pressure regulators PRV ADCA (Portugal) and pressure reducing valves COSR TLV (Japan).

The steam pressure regulator to itself is a bypass valve.

The main purpose of the pressure regulator to itself , or as it is also called the bypass valve , is to maintain a given pressure pressure in front of the valve, that is, to the pressure regulator. If the pressure at the inlet to the bypass valve rises, then it opens and bypasses (hence the name bypass) a part of the medium through itself, maintaining the pressure up to the valve stable (set). The principle of operation is similar to the safety valve, with the only exception that the safety valve is not designed to operate continuously in this mode, while the bypass valve (pressure regulator to itself) can constantly regulate the flow. The Teploterm company offers a pressure regulator to itself ARI-Predex (Germany) and a bypass valve ARI-Preso (Germany) manufactured by ARI-Armaturen (Germany).

The differential pressure regulator is another regulator that serves to maintain the differential pressure of the working medium. Maintaining a constant differential pressure allows you to get a constant flow in certain areas of the system.

ADVANTAGES OF PRESSURE REGULATORS:

• -Compactness . Reducing valves have a standard construction length, which allows them to be replaced with similar ones if necessary;
• -Reliability. Pressure reducing valves ARI-PREDU and pressure regulators to themselves ARI-Predex excellent performance in systems where it is necessary to reduce pressure;
• -Versatility. The Teploterm company offers downstream pressure regulators and downstream pressure reducing valves for various media (downstream steam pressure regulator, downstream pressure reducing valve to air, water reducer, nitrogen pressure regulator, etc.);
• - Anticorrosive properties. The downstream pressure reducing valve, downstream pressure regulator and bypass valve can be made from a variety of materials to suit the media or installation location. For example, stainless pressure regulators are used for corrosive media;
• - Practicality. ARI-PREDU pressure reducing valves have a wide range of settings upstream and downstream. The most common pressure reducing valves ARI-Predu are always in stock of our company.

MAIN VARIETIES OF REDUCING VALVES.

By type of connection of pressure regulators:

• - flanged pressure reducing valves. The pressure regulator is connected to the pipeline with a flange connection;
• - threaded pressure regulators (pressure regulator ARI-Predu, bypass valve ARI-Preso, pressure regulator upstream ARI-Predex) are connected through the thread to the pipeline;
• - the pressure regulator for welding is welded to the pipeline.

By purpose, pressure regulators are classified:

• -After pressure regulator. The pressure reducing valve maintains the set pressure after itself;
• -Pressure regulator up to yourself. The pressure reducing valve maintains the set pressure up to it;
• - Differential pressure regulator. The valve maintains a given differential.

By compatibility with working media, pressure reducing valves are classified:

• - steam pressure regulator;
• - reducer for water;
• - air pressure reducing valve;
• - nitrogen pressure regulator, etc.

According to the body material, pressure regulators are divided into:

• - cast-iron pressure regulators can only be used indoors with various media that are not corrosive to the body materials and components of the pressure reducing valve;
• -steel pressure regulators are used in pipelines with a nominal pressure of the body PN25 and above, they can be installed outdoors;
• -stainless steel pressure regulators are mainly used in pipelines with corrosive media and at high pressures of the working medium.

ADVANTAGES OF ORDERING PRESSURE REGULATORS IN THE COMPANY TEPLOTERM:

• -availability of various pressure reducing valves in stock;
• -we offer pressure regulators for various systems, including pressure reducing valves for installation in explosive industries;
• - direct contracts with manufacturers allow us to offer a competitive price;
• -our company offers pressure regulators with diameters up to DN150;
• -we offer pressure regulators with different setting ranges;
• - if a suitable pressure reducing valve is not in our stock, the delivery time of the pressure regulator will be as short as possible.
• -Experienced specialists will help you choose and advise you when choosing a pressure reducing valve;
• - the maximum amount of information on our website for each type of pressure reducing valve allows the Customer to familiarize himself with the technical characteristics before ordering;
• - reducing valves are supplied, both in Ukraine by various transport companies, and can be exported.