Ball valves
-
Ball valve N / F for welding GENEBRE 2026 DN10-DN100
Starting at: ₴798.48
Ball valves, buy a ball valve, EFAR ball valve, Genebre stainless ball valve.
Ball valve - a shut-off device with a spherical locking element. Ball valves are widely used in various engineering systems. Until 2000, ball valves were rarely used, as they did not provide complete tightness, but the use of soft ball valve seats made it possible to avoid leakage of ball valves. In today's engineering systems, ball valves are widely used, not only with fluoroplastic seals, but also ball valves with metal-to-metal seals, ball valves with a floating ball, etc.
Ball valves have a very simple design, but the complete tightness of the ball valve allows them to be used in many pipeline systems.
ADVANTAGES OF BALL VALVES:
- -Compactness . Ball valves have a very compact design. The body of the ball valve can be shortened, which allows the ball valve to be mounted in compressed conditions.;
- -Practicality . Ball valves have a much lower cost than shut-off valves or gate valves, while the service life of the valve ball is very long;
- - Tightness. Ball valves from the Teploterm company hermetically shut off the flow of the working medium in the pipeline, and on additional request we are able to offer a ball valve with tightness class A;
- -Versatility. The Teploterm company offers ball valves for various media (ball valves for gas, ball valves for steam, ball valves for sunflower oil, ball valves for oil products, etc.);
- - Anticorrosive properties. Ball valves can be made from a variety of materials to suit the media or installation location. For example, Genebre stainless ball valves are used in corrosive working environments, EFAR ball valves for natural gas, etc.;
- -Automation. Teploterm specialists offer various actuators for ball valves, which makes it possible to install ball valves in automated pipeline systems. We offer ball valves with electric drive and ball valves with pneumatic drive.
MAIN VARIETIES OF BALL VALVES.
Throughput:
- - non-full bore ball valves (standard bore ball valves) have a narrower passage section, i.e. the connecting diameter of the pipeline is higher than the section inside the ball valve;
- - full bore ball valves have the same passage as the connecting pipeline.
Connection type:
- - flange ball valves . The ball valve is connected to the pipeline using a flange connection;
- - threaded ball valves (coupling ball valves). The ball valve is connected through a thread to the pipeline; Ball valves with VN-VN thread or ball valves with VN-NAR threads ;
- - ball valve for welding . The ends of the ball valve are welded to the pipeline.
By appointment:
- - ball valve. It is used to block the flow of the working environment;
- - control ball valve. A special design of the ball valve with the ability to regulate the flow is used.
For compatibility with working environments:
- - ball valve for water supply systems is used in systems with cold and / or hot water;
- - a ball valve for gas is used for pipelines with natural or liquefied gas;
- - ball valve for air is used in systems with compressed air;
- - a ball valve for thermal oil systems is used in pipelines where the coolant is thermal oil with a temperature of 280-320 ° C, etc.
Body material:
- -brass ball valves are mainly used in pipelines with water and air;
- - cast-iron ball valves can only be used indoors with various media that are not corrosive to the materials of the body and components of the ball valve;
- -steel ball valves are used in pipelines with natural/liquefied gas, pipelines with water and air, in pipelines with thermal oil, etc. Can be installed outdoors;
- -stainless steel ball valves are mainly used in pipelines with corrosive media.
ADVANTAGES OF ORDERING BALL VALVES IN THE COMPANY TEPLOTERM:
- -availability of various ball valves in stock;
- -we offer ball valves for various systems, including ball valves for severe operating conditions;
- - direct contracts with manufacturers allow us to offer a competitive price;
- -our company offers ball valves with diameters up to DN1000;
- -we offer ball valves with various drives;
- - if a suitable ball valve is not in our warehouse, the delivery time of the ball valve will be as short as possible.
- -experienced specialists will help you choose and advise you in the selection;
- - the maximum amount of information on our website for each type of ball valve allows the Customer to familiarize himself with the technical characteristics before ordering;
- -ball valves are supplied, both in Ukraine by various transport companies, and can be exported.
BALL VALVES OF VARIOUS MANUFACTURERS from Teploterm:
- - ball valves EFAR (Poland) . They are used in water supply systems, in compressed air systems, for natural and liquefied gas, as well as in steam and condensate systems;
- - ball valves GENEBRE (Spain) . Stainless, steel, cast iron and brass ball valves from the Spanish manufacturer Genebre have won the trust of customers with their competitive cost and reliability;
- - cast-iron ball valves Brandoni (Italy) and ball valves Zetkama (Poland) . The body of the valves is made of cast iron, which allows them to be operated only indoors, but the cost of cast iron ball valves is much lower than steel ball valves;